Saturday, August 11, 2012

Marshalltown Bucket heater: review

Like many other home-brewers that have switched to all grain, I have lamented on how long it takes to get almost 9 gallons of water to Immersion/sparge/rolling boil temperature off of a stove top! oftentimes it made the brew-day agonizing long and very boring as I waited insane amounts of time for my liquid to get to a proper temperature.

Most people are very vehement on buying a propane burner/tank, but Living in an apartment, I don't exactly have a porch where I can do that safely. I got a burner with the purchase of my pot but had no space or gas to run it. I thought that my brewday would forever be agonizingly long.......

However, Basic brewing Radio got me on the right path. I saw a Video podcast where they used a electric device for getting their water up to temperature FASTER than propane can.

Obviously I knew immediately that I needed to get one for myself, only problem is that I didn't have the proper equipment to get started (you need a nice 3 pronged wire which I lacked). Even without that piece, it would still had costed 50$ to build my heat stick, until I found this beauty on amazon.

Priced at 40$ shipped (on prime), it was a steal..........and against the advice of my brewing buddy (I never listen to him anyway :P) I purchased it, and let my tell you, its worth it.

It isn't powerful enough to bring the water to a boil, but it CAN drastically increase the time it takes to bring you water to a boil and speeds up the boiling off process. Combined with a large stove-top coil its as effects as most low-mid range propane burners in temperature.

Sprage and Infusion temperatures can be reached in 15-20 minutes when using hot water from the tap (and combined with my stove-tops burner on max heat). Boil can be reached in about 30-35 minutes, which is not as fast as some propane burners, but is damn close for the pieces specs.

It is only a bit over 1000 watts, but it does a lot for its relatively low rating. I highly suggest it for anyone looking for a entry heat stick and lacking the means for building their own.

Just make sure to keep it submerged in at least 8 inches of water and to plug it in when its in your liquid and  it will work perfectly!

I give it a 8/10, meaning that it really needs more power to be a perfect brewing tool, but allows you to keep all grain in the kitchen for a relatively good price. Its also the best option for a heat stick without forcing you to build one from scratch
Comes with a one year Warranty.
Link:
http://www.amazon.com/MARSHALLTOWN-Premier-742G-Bucket-Heater/dp/B000BDB4UG

Wednesday, August 8, 2012

Intro + Iris brown ale recipe

As you might had guessed, I live in Tallahassee and brew my own beer, and that is the main purpose of this blog.

To post the recipes I've made, review bars and events, Brewing Equipment and styles, Brewing books, and to review beers I've tried.

I might even review a few Whiskeys and vodkas here and their, just to add a little flair here and their.

Hopefully I will be able to keep it updated, fresh, interesting, and above all else, delicious (My recipes have to be good right!)

now that the formalities have been finished, here is my favorite current recipe, Iris Brown ale

Type: all grain
Fermentation: 1 stage
Grain bill:

  •  8 lb Maris Otter pale 
  • 1.75 lb Caramel 60
  • 1 lb Brown 
  • .5 lb caramel 30
  • .5 lb roasted barley
  • .5 lb Brown sugar
  • .25 coffee malt
Hops
  • .75 oz  Glacier, 20 minutes
  • 1 oz Willamette, 10 minutes
Yeast
  • British ale yeast, WLP005

Process:
I mash my grains in at about 154 degrees for about 90 minutes. This tends to convert most of the sugars in the grain and I've found it to be fairly reliable. I mash in with about 4 gallons of water and recirculate back into the mash for filtration.

I fly sparge out with about 50% more water than I started with (6 gallons) and pour it in at almost 200 degrees (It dilutes down to almost 160 degrees after going through my strainer) and let this sit for about 30 minutes.

After that I keep my first running (from infusion) in a separate 5 gallon pot and my large sparge (still almost 6 gallons) into my 7.5 gallon pot and boil off water for about a hour.

after about 1-2 gallons have been boiled off of both pots I combine each of them and add .5 lb of caramelized sugar into the 7.5 gallon pot. I then go through a 40 minute boil before adding my hops.

My hops additions may seem to be too short, but these late hop additions will still give off the necessary bitterness (for the style) without giving it overly harsh flavors.


After the hop profile is done, cool, and pitch yeast.

Harvest and bottle in 2 weeks. No secondary fermentation.

Its ready to drink 1-2 weeks after bottling. Serve chilled.